Feature Reference

System Day (#102)

Description

This System Programming procedure sets the day of the week that appears on system display phones.

Related Features

Backup Programming—Automatic (#123) and Backup Programming— Manual (#124) do not backup up the System Day.

Restore Programming (#125) does not restore the System Day.

Considerations

Be sure that the System Day is set correctly before using backup or restore procedures.

Valid Entries

1 = Sun

2 = Mon

3 = Tue

4 = Wed

5 = Thu

6 = Fri

7 = Sat

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the System Day:

1.Press f00ss#10 2at extension 10 or 11.

2.Change the day by entering a new setting number as listed in “Valid Entries” above. For example, to set the day to Tuesday, press Duntil the display reads:

System Day

3Tue

3.Select another procedure or exit programming mode.

5-200

Page 299
Image 299
Lucent Technologies 518-458-100 manual System Day #102, 200