Lucent Technologies 518-458-100 manual DXD 1=Record

Direct Extension Dial Record/Playback (I892)

To record a Direct Extension Dial message:

1.Turn off Direct Extension Dial and Automatic System Answer at extension 10 and wait for any calls in the process of being answered by these features to be completed.

2.Lift the handset of the system display phone at extension 10 or 11.

3.Press the ibutton.

4.Dial 8 92. The current time of day remains on the second line of the display for the duration of this procedure. The top line of the display reads:

DXD: 1=Record

If a message was previously recorded, the following appears on the display:

DXD: 1=Rec 2=Play

5. Press 1. The following appears on the display for three seconds:

Record at tone

After three seconds, you hear a tone and you can begin recording your message. While you are recording, the following display appears:

Press # to stop

6.Press #when you are done recording.

If the allotted time (40 seconds) for the message is completed before you press #, you hear a tone to let you know that the system has stopped recording.

When you finish recording, the following appears on the display:

DXD: 1=Rec 2=Play

7.At this point:

■To re-record the message, follow the instructions from Step 5 in this procedure.

■To play back the message, follow the instructions from Step 5 in the playback procedure that follows.

■To exit the procedure, hang up the handset.

To play back a Direct Extension Dial message:

1.Turn off Direct Extension Dial and Automatic System Answer at extension 10 and wait for any calls in the process of being answered by these features to be completed.

2.Lift the handset of the system display phone at extension 10 or 11.

3.Press the ibutton.

4.Dial 8 92. The following appears on the display:

DXD: 1=Rec 2=Play

5-75