Lucent Technologies 518-458-100 manual Programming, Using System Phone

Call Coverage (F20,XX,XX)

■You can program Call Coverage on a button on a system phone. Use a button with lights if you want a visual indication when your calls are being covered. When the green light is on, your calls are being covered; when the green light is off, Call Coverage is not active.

■If the Call Coverage feature code and optional originating and covering extensions are programmed on a button with lights, you can use the button to turn Call Coverage on and off with one touch. (The lights show when Call Coverage is on, even if calls are covered by a different extension than the one stored on the button, and you can still use the button to turn Call Coverage off.)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as s and e on system phones.)

To program a Call Coverage button:

1.Press f00ssc.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button, preferably a button with lights.

4.At this point, you can do one of the following:

■Press f20.

■Press f20and the number of the originating extension.

■Press f20the number of the originating extension, and the number of the covering extension.

5.Program another button for this extension or exit programming mode.

Using

System Phone

To send calls for coverage manually:

1.Press f20.

2.Dial your extension number.

3.Dial the extension number of the covering extension. To remove Call Coverage manually:

1.Press f20.

2.Dial your extension number twice.

5-43