Lucent Technologies 518-458-100 manual You are connected with the first party

Models: 518-458-100

1 407
Download 407 pages 55.58 Kb
Page 162
Image 162

Conference Calls

information about such features, see the documentation for your PBX or Centrex system. (When your Centrex or PBX documentation tells you to use a switchhook flash, use the Recall feature instead.)

Outside parties may be harder to hear on a conference call than on a two-party call, depending on the number of parties and the outside lines connected to the system.

Standard phones cannot have more than three parties.

Using

System Phone

1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)

You are connected with the first party.

2.Press C.

The first party is now on hold.

3.Set up the call to the second party.

You are connected with the second party. If you are adding an inside party to a call, you must wait until the party answers. If you are active on a call using a pool button and you want to set up a conference call using one of the other lines in that pool, you can press iand dial the pool’s access code to gain access to another line in that pool.

4.Press Cagain to add the second party to the call. You can now speak with the first and second parties.

5.Repeat Steps 2 through 4 to add more parties.

Standard Phone

1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)

You are connected with the first party.

2.Press the switchhook down once rapidly.

The first party is now on hold. You hear intercom dial tone.

3.To add an outside party, dial 9or a pool access code plus the outside number. If the number is busy or does not answer, hang up and the first party rings back.

To add an inside party, dial the two-digit extension number. If the extension is busy or does not answer, press the switchhook down once rapidly and you are reconnected with the first party.

4.When the second party answers, press the switchhook down once rapidly. You are now connected with both parties.

5-63

Page 162
Image 162
Lucent Technologies 518-458-100 manual You are connected with the first party, First party is now on hold