Lucent Technologies 518-458-100 manual Pool Line Assignment #207, 175

Pool Line Assignment (#207)

Pool Line Assignment (#207)

Description

This procedure applies only to systems configured for Hybrid mode.

This System Programming procedure assigns lines to or removes lines from the main and auxiliary pools supported for Hybrid mode. You can change line assignments in the main pool (880) or in any of three auxiliary pools (881, 882, or 883).

Related Features

■You can use Pool Extension Assignment (#314) to assign pools created with this procedure to specific extensions.

■If you want to prevent a user at an extension from accessing all lines in a specific pool, you must restrict the extension using Pool Access Restriction (#315).

■You can use Line Access Mode (#313) to change a pooled extension to a key extension.

Considerations

■You can assign some or all outside lines to a specific pool, but you cannot assign a specific outside line to more than one pool.

■Because users cannot control which line they get when they access a pool, you should group lines with similar purposes (WATS lines, FX lines, lines designated for a particular set of users) together in a unique pool.

■If you have individual lines assigned to a pooled extension and you use this procedure to change pool line assignment, be careful not to press D or dto specify a pool assignment. If you do, the system will remove that line from all extensions that have the line assigned.

Valid Entries

1 = No Pool

2 = Main Pool 880 ✔ all lines assigned

3 = Pool 881

4 = Pool 882

5 = Pool 883

5-175