Lucent Technologies 518-458-100 manual Using System Programming, Hospitality Features

Using System Programming

Backup Programming—Manual (#124) enables you to initiate a backup of your system and telephone programming settings whenever you feel that it is necessary. It is recommended that a backup be performed after any change to the system or telephone programming.

Restore Programming (#125) copies either the manual or the automatic backup data stored on a PC Card back to the system, thereby enabling you to restore settings to their status at the time of the last automatic or manual backup.

Hospitality Features

The following hospitality feature is for special applications, such as the Bed-and-Breakfast and Hotel/Motel industries. The receptionist at extension 10 optionally can use the Intercom Autodialer to specify an extension.

■Outgoing Call Restriction Button (#114) lets you program a button on the system phone at extension 10 to change an extension’s current Outgoing Call Restriction setting without entering System Programming mode. For example, after a guest’s departure, a hotel manager can change the No Restriction setting of the guest room phone to “Inside Only” so outside calls cannot be made from the phone after the guest checks out.

Using System Programming

System Programming changes settings for the system as a whole, or for individual lines, pools, or extensions. You can also use System Programming to set up dialing restrictions, define groups, or set up auxiliary equipment. Refer to the filled-out System Planner when you are changing system settings, and be sure that any changes in programming are recorded there.

Programming Overlays

System Programming requires a Programming Overlay placed over the dialpad of the system display phone at extension 10 or 11. Overlays are provided with the system documentation. Replacements can be ordered from the Lucent Technologies BCS Publications Center. (See ‘‘Reference Materials’’ under ‘‘Product Ordering Information’’ on page B-3.) Figure 2-2on page 2-19illustrates the Programming Overlays for the PARTNER Endeavor-34D and PARTNER Endeavor-18D phones.

During System Programming, the normal functions of several buttons on the display phone at extension 10 or 11 change. For example, the left ibutton becomes sand the right ibutton becomes c. The Programming Overlay identifies these buttons.

2-17