Lucent Technologies 518-458-100 manual Line Access Mode #313, 128, Ringing

Feature Reference

Line Access Mode (#313)

Description

This procedure applies only to systems configured for Hybrid mode.

This System Programming procedure identifies individual extensions that are to operate as key extensions even though the system is configured for Hybrid mode. If an extension’s Line Access Mode is changed to Key, individual lines can be assigned to specific buttons on that extension’s phone regardless of whether they are part of a pool.

Related Features

■When an extension is changed from Pooled to Key, any previously assigned pool buttons are removed from the extension and Pool Access Restriction (#315) is set to No Access. Additionally, the extension is programmed with factory settings for Line Assignment (#301), Line Access Restriction (#302), Automatic Line Selection, and Line

Ringing.

■When an extension is changed from Key to Pooled, any previously assigned line buttons are removed from the extension and Pool Access Restriction (#315) is set to No Restriction. Additionally, the extension is programmed with factory settings for Pool Line Assignment (#314), Pool Extension Assignment (#314), Automatic Line Selection, and Line

Ringing.

Considerations

■Extension 10 operates as a key extension regardless of how the system is configured. The Line Access Mode for extension 10 cannot be changed.

■Extensions that are programmed as key extensions cannot access pools either by pressing pool buttons or by dialing pool access codes.

Valid Entries

1 = Pooled ✔ all extensions except 10

2 = Key ✔ extension 10 only

5-128