Lucent Technologies 518-458-100 manual Programming, 231

Wake Up Service Button (#115)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Wake Up Service button at extension 10:

1.Press f00ss#11 5at extension 10 or 11.

2.At this point:

■If you want to assign Wake Up Service to the first available button, press Duntil the following appears on the display:

Wake Up Button

1Assigned-Ext10

■If you want to remove the Wake Up Service button assignment, press Duntil the following appears on the display:

Wake Up Button

2 Not Assigned

■If you want to assign Wake Up Service to a specific button, press 3. The following appears on the display:

Wake Up Button

3 Select Button

Then press a programmable button with lights to assign Wake Up

Service to that button.

3.Select another procedure or exit programming mode.

4.Label the Wake Up Service button at extension 10.

Using

To schedule a wake up call for a specific extension:

1.Press the Wake Up Service button at extension 10.

The green light next to the Wake Up Service button flutters. Wake Up Service is activated and the display reads:

Wake Up

2.Dial the two-digit extension number of the desired extension (or use an Auto Dial button). For example, to schedule a wake up call for extension 32, press 3 2. The following appears on the display:

Wake Up 32 -:-

5-231