Lucent Technologies 518-458-100 manual Dial Mode #201, Related Features

Dial Mode (#201)

Dial Mode (#201)

Description

This System Programming procedure identifies individual lines as touch-tone or rotary. You should check with your local phone company if you are not sure which type of line is being provided to you.

Related Features

■If you are having difficulty using touch-tone phones on rotary lines, you may need to adjust the Rotary Dialing Timeout (#108).

■If the system has rotary lines, you can use Touch-Tone Enable to send touch-tone signals over a rotary line (for example, to access bank-by-phone services).

■If Dial Mode (#201) is set to Rotary, star codes are entered by dialing 11 instead of *. If you have users at extensions with Outgoing Call Restriction (#401) set to Local Only who are calling out on lines with the Dial Mode (#201) set to Rotary, you should add “11” to an Allowed Phone Numbers List (#407) and assign the list to these extensions. Otherwise, when the users at the restricted extensions dial 1 to begin a star code, the system interprets this as an attempt to place a long-distance call, the call is blocked, and the user hears the reorder tone.

Valid Entries

1= Touch-Tone line ✔

2= Rotary line

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Dial Mode setting for a specific line:

1.Press f00ss#201at extension 10 or 11.

2.Enter the first line to be programmed. For example, to program line 8, press

08.

3.To change the dial mode, press Duntil the appropriate value displays.

4.To program another line, press nor puntil the line number shows on the display. Then repeat Step 3.

5.Repeat Steps 3 and 4 for all lines that you want to change.

6.Select another procedure or exit programming mode.

5-67