Lucent Technologies 518-458-100 manual 159

Number of Lines (#104)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To assign lines to the system at initial system setup:

1.Press f00ss#10 4at extension 10 or 11.

2.Enter two digits for the number of outside lines in the system that you want to assign to all extensions or the main pool. For example, dialing 06 means that all extensions are assigned lines 1 through 6 or lines 1 through 6 are assigned to the main pool.

3.Select another procedure or exit programming mode.

5-159