Lucent Technologies 518-458-100 manual Valid Entries, 101

External Hotline (#311)

■A standard phone without a dialpad is recommended for use as the external hotline.

■You can identify several extensions as external hotlines.

Valid Entries

1 = Assigned

2 = Not Assigned✔

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To identify an external hotline extension:

1.Press f00ss#31 1at extension 10 or 11.

2.At the Extension: prompt, enter the external hotline extension number. For example, to program extension 16 as the external hotline, press 16.

3.To assign or unassign the extension, press Duntil the appropriate value displays.

4.To program another extension, press nor puntil the extension number shows on the display. Repeat Step 3.

5.Select another procedure or exit programming mode.

To program the external hotline phone number as Personal Speed Dial code 80:

1.Press f00ssc.

2.Dial the extension number of the external hotline.

3.Press f80.

4.Enter the external hotline phone number exactly as you would dial it.

5.Continue programming or exit programming mode.

Using

1.Lift the handset of the external hotline.

After approximately three seconds, the programmed phone number is dialed automatically.

2.If you do not hear dial tone or dialing noises, hang up for about 20 seconds and try again.

3.When the call is answered, speak into the handset.

5-101