Lucent Technologies 518-458-100 manual Caller ID Name Display F16

Feature Reference

Caller ID Name Display (F16)

Description

This feature lets users with system display phones toggle the display between Caller ID number and Caller ID name. Caller ID name is an optional feature of the Caller ID service provided by your local telephone company and may not be available in your area (even if Caller ID number is available).

Related Features

■To view Caller ID information for a second call, while active on a call, users can program Caller ID Inspect onto a button.

■Refer to Caller ID for details on Caller ID information.

■This feature has no effect on Call Coverage calls. Coverage calls always display the extension number of the user who is sending calls for coverage.

Considerations

■This feature must be programmed on a button with lights on a system display phone. When Caller ID Name Display is on, the green light is on, indicating that the Caller ID name will be displayed rather than the Caller ID number.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Caller ID Name Display button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button with lights.

4.Press f16.

5.Program another button for this extension or exit programming mode.

Using

Press the programmed button to turn Caller ID Name Display on; press it again to turn it off. Use the button like a switch—when the light is on, Caller ID Name Display is on.

5-58