Lucent Technologies 518-458-100 manual Valid Entries, 206

Feature Reference

■If you program 911 or other emergency numbers as Speed Dial numbers and want to place test calls, you should: 1) perform such activities in the off-peak hours, such as early morning or late evening and 2) remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

■You can use multiple Auto Dial buttons and Speed Dial numbers during the course of a single call.

Valid Entries

Any phone number—up to 28 characters consisting of the digits 0–9, *, #, and special dialing functions that you can access by pressing h(Pause),! (Stop), S(Recall), and &(Touch-Tone Enable)—assigned to codes 600 through 699

No number assigned to any code ✔

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program System Speed Dial numbers:

1.Press f00at extension 10 or 11. the following appears on the display:

PROGRAM EXT 10

2.Select a three-digit code by pressing fand dialing three digits between 600 and 699. For example, to select code 600, press f6

00.

If a number is assigned already to the code, the number appears on the display. If no number is assigned to the code, the display reads:

Blank

3.Enter the number. For example, to program 555-4757, press 5554

757. The following display appears:

5554757

To mark the System Speed Dial number to override dialing restrictions, precede the number by a *. For example, to mark the number 555-1001, press *55510 01. The following display appears:

*5551001

At this point:

■To program another System Speed Dial number, start from Step 2.

■To program over an existing number, enter the new number after selecting the three-digit code.

■To remove a System Speed Dial number, enter the number’s three-digit code and press!once.

4.Press f00to exit programming mode.

5-206