Lucent Technologies 518-458-100 manual 171

Pool Access Restriction (#315)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To restrict an extension from making or receiving calls on all the lines in a specific pool:

1.Press f00ss#31 5.

2.Enter the number of the extension to be programmed. For example, to

program extension 23, press 23. The following appears on the display:

PoolRstrctXXPXXX

Pool:

3.Enter the pool number (880, 881, 882, or 883) to be restricted at this extension. For example, to restrict pool 881, press 88 1. The current restriction displays.

4.To change the pool restriction for this extension, press Duntil the appropriate value displays—see “ Valid Entries” on the previous page .

5.At this point:

To restrict another pool at this extension, press nor puntil the pool number shows on the display. Then repeat Step 4.

To restrict another extension, press Nor Pand begin at Step 2.

6.Select another procedure or exit programming mode.

5-171