Lucent Technologies 518-458-100 manual Using System Phone, 167

Personal Speed Dial Numbers

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program Personal Speed Dial numbers:

1.Press f00sscat extension 10 or 11.

2.Dial the number of the extension to be programmed with this feature.

3.Select a two-digit code by pressing fand dialing two digits between 80 and 99. For example, to select code 81, press f8 1.

If a number is assigned already to the code, the number appears on the display. If no number is assigned to the code, the display reads:

Blank

4.Enter the phone number exactly as you would dial it.

5.At this point:

■To program another Personal Speed Dial number, start from Step 3.

■To program over an existing number, enter the new number after selecting the two-digit code.

■To remove a Personal Speed Dial number, enter the number’s two-digit code and press!once.

6.Continue programming or exit programming mode.

Using

System Phone

You can lift the handset or press Sbefore dialing:

1.If you want to call on a specific line, press the line button (or press i 8and the two-digit line number) or if you want to call using a specific pool, press the pool button (or press iand the three-digit pool access code).

2.Press f.

3.Dial the two-digit Personal Speed Dial code (80–99).

If you did not specify an outside line or pool, the system automatically selects one, turns on the speaker if the handset is in the cradle, and dials the number. The number being dialed shows on a display phone.

5-167