Feature Reference

VMS Hunt Delay (#506)

Description

This feature applies only if you have a voice messaging system.

This System Programming procedure determines when outside calls should be answered by the Automated Attendant Service of the voice messaging system. You can set the system for either immediate call handling (after the second ring) or delayed call handling (after the fourth ring). Delayed call handling gives the receptionist an opportunity to answer calls before they go to the Automated Attendant Service.

Related Features

You must use Group Call Distribution (#206) to assign lines to Hunt Group 7.

You must use Hunt Group Extensions (#505) to assign the extensions associated with the voice messaging system hardware to Hunt Group 7.

Valid Entries

1 = Immediate

2 = Delayed

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the VMS Hunt Delay setting for the voice messaging system’s Automated Attendant service:

1.Press f00ss#50 6at extension 10 or 11.

2.Press Duntil the appropriate value displays.

3.Select another procedure or exit programming mode.

5-222

Page 321
Image 321
Lucent Technologies 518-458-100 manual VMS Hunt Delay #506, 222