%Audio button [61]
Press repeatedly to select one of the audio languages programmed on a DVD.
For Video CD and MP3, each press changes the audio output as follows.
→Stereo → 1/L(Left) → 2/R(Right)
^Angle button [63]
Some DVDs are recorded with various camera angle playback options. Press Angle repeatedly to display different camera angles.
&Last M button [62]
You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the DVD receiver. Press Last M during playback to set a Last Memory Point. When you want to resume playback of that disc, press Last M in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5 DVDs and 1 Video CD.
*Program button [56-59]
You can program titles, chapters or tracks to play back in desired order. Programs can be a maximum of 24 steps.
(Number buttons (1-9, +10, 0) [29, 51, 56-59, 78]
Use to perform direct title/folder and chapter/track searches, and to input numerical values. Press Mode Rcvr for additional functions (see following page).
)+10/--/--- button [39, 78]
Press to input numbers over 10.
_Standby button [34, 43, 45, 62]
Put the DVD Receiver in standby.
+Light button
Illuminates the buttons. This button is useful when using the remote controller in dark locations. When pressed, the buttons on the remote controller light green.
¡Clock button [41]
Press to view the clock display.
™Display button [27, 36, 41, 63, 64]
Press to change the information being displayed.
£Menu button [32, 53, 61, 63]
Use to display or close the DVD menu or MP3 Navigator screen.
¢VOL %/fi buttons [40]
For adjusting the volume.
∞Setup button [30, 66]
Press when the DVD Receiver is in either play or stop mode to open and close the Setup screen.
§Muting button [40]
Activates the mute function.
¶A. Control button [51]
Press to change the acoustic mode to boost the super bass/high frequency sounds.
•£ button [29, 32, 34, 52, 54-58, 60]
Press to start or resume playback.
ª1/¡ buttons [33, 35]
During playback of DVD and Video CD, press ¡ to perform fast forward scanning or 1 to perform fast reverse scanning of DVD and Video CD. When a CD or MP3 is loaded, audio scanning is performed.
ºA-B button [54]
Press at the beginning and end of the section you want to repeat or to mark a location you want to return to.
–
button [29, 32, 55]
Press to pause disc playback. Press again to resume playback.
≠Timer button [41-45]
Press to activate a timer function or to set a timer program.
ŸFM Mode button [35, 39]
For AM/FM input, press to switch between FM Stereo auto and mono.
⁄Subtitle button [61]
Press repeatedly to select one of the subtitle languages programmed on DVD or to turn the subtitles off.
¤Clear button [53, 54, 59, 61-63]
Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.
‹Random button [60]
Press to play chapters/tracks in random order.
›Search/Enter button [52, 79]
Press to perform a title/folder, chapter/track or elapsed time search. Press to confirm when controlling a connected TV.
Press Mode Recvr to use the following (gray) buttons
Other buttons have the same functions as when Mode DVD button is pressed.
| SP Setup | Test Tone | CH Sel | 6 |
1 | 1 | 2 | 3 | 7 |
2 | SW Mode | Distance |
| |
3 | 4 | 5 | 6 | 8 |
IPM | Up/Down | |||
4 | 7 | 8 | 9 |
|
5 | +10 | 0 | Search |
|
|
|
Enter |
1SP Setup button [26]
Press to select the optimum speaker configuration.
2SW Mode button [26]
Press to select the subwoofer mode.
3Distance button [27]
For setting the distances for each speaker.
4IPM (Intelligent Power Management) button [25]
Activates the IPM function.
5T-D Setup [48, 49]
For setting the
6CH Sel button [27, 28, 50]
Selects a speaker for changing the speaker output level.
7Test Tone button [28, 50]
Outputs a test tone for setting speaker levels.
8Up/Down 5/∞ buttons [27, 28, 48, 50]
Press to adjust the value.
13
