Integra DSR-7.3 instruction manual Connecting to a TV or projector, Before connecting

Connecting to a TV

Before connecting

•Refer also to the instruction manual of the TV.

•When you connect the DVD Receiver to the TV, be sure to turn off the power and unplug both the units from the socket before making any connections.

•Connect the DVD Receiver to the TV directly. If you connect the DVD Receiver to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

•Connect the plugs securely.

•Note that one audio/video connection cable and one S video connection cable are supplied.

Incomplete

Insert completely

■Connecting to a TV (or projector)

Using the supplied audio/video connection cable, make audio connections from the TV/LINE IN L and R jacks to the corresponding audio output jacks on the TV. In the same manner, make video connections from the VIDEO OUTPUT “VIDEO” jack to the corresponding video input jack on the TV.

If your TV has a S video input jack and/or component video input jacks, make S video connection to the S VIDEO jack using supplied S video connection cable and/or make component video connection to the COMPONENT jacks using component video connection cable (not supplied). These connections allow you to enjoy higher quality picture playback. You can switch between [S1] and [S2] S-video output from the Setup menu on page 69.

Notes

•Actual labels for component video inputs may vary depending on the TV manufacturer (ex. Y/CB/CR, Y/B-Y/R-Y, etc.).

•In some TVs, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV for optimum performance.

TV or projector

DIGITAL
OUT	AUDIO		VIDEO S VIDEO COMPONENT VIDEO IN
OPTICAL		OUT	IN	IN	Y	PB	PR
	R	L

Use the DIGITAL OPTICAL IN jack in combination with the TV/ LINE IN jack. When you use the Input selector to select TV/LINE IN, DIGITAL OPTICAL IN is also activated. When both a digital signal and an analog signal are input, the digital signal takes precedence.

Video (Yellow)

L(White)

R (Red)

Y

PB

PR

Audio/video connection cable

S video connection cable

Optical fiber cable

Component video connection cable

Signal flow

L		ANTENNA	SURROUND
PREOUT	IR		SPEAKERS
			R	L
AUDIO
REMOTE	IN
CONTROL
R	AM		FM 75

SUB	IN	OUT	IN
WOOFER	TV/LINE	MD/CDR/TAPE
DIGITAL			VIDEO OUTPUT

YPBPR

OPTICAL

OUT IN S VIDEO VIDEO COMPONENT

FRONT SPEAKERS			AC INLET
R	CENTER	L

DO NOT connect the power cord at this time.

See “Turning the unit on/off with the TV’s power switch — IPM function” on page 25 for Inteligent Power Management (IPM) function.

16