Lucent Technologies 518-458-100 manual System Password #403, 201

System Password (#403)

System Password (#403)

Description

This feature is available only on PARTNER and PARTNER Endeavor phones.

This System Programming procedure defines a four-digit password that users can enter from the phones to override dialing restrictions (if the extension has access to an outside line).

Related Features

■The password overrides all dialing restrictions except Line Access Restriction (#302) and Pool Access Restriction (#315).

■Once a password is programmed, you must enter it to turn Night Service on and off. Additionally, if Night Service is on, users in the Night Service Group must enter the password to make any outgoing calls (except calls to numbers on the Emergency Phone Number List (#406) and marked System Speed Dial Numbers). Dialing restrictions for extensions not in the Night Service Group remain the same as during normal daytime operation.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a System Password:

1.Press f00ss#40 3at extension

10 or 11. The following appears on the display:

Set Password

Data - - - -

2.Enter a four-digit password or press rto delete the existing password.

3.Select another procedure or exit programming mode.

Using

1.Before lifting the handset or turning on the speaker, press h.

2.Enter the password.

The System Password does not appear on display phones.

3.Press an outside line button (or press i8and a two-digit line number) or a pool button (or press iand a three-digit access code) and lift the handset.

4.Dial the number.

The password is in effect until you hang up the phone.

5-201