Lucent Technologies 518-458-100 manual Toll Call Prefix #402, 209

Toll Call Prefix (#402)

Toll Call Prefix (#402)

Description

This System Programming procedure indicates whether users must dial a 0 or 1 before the area code to make a long-distance call, or just the area code and number. This feature should be set to reflect the dialing patterns of your local telephone company.

Related Features

This procedure affects the operation of dialing restrictions and permissions. For more information, see Allowed Phone Number Lists (#407), Disallowed Phone Number Lists (#404), and Emergency Phone Number List (#406).

Valid Entries

1 = 0 or 1 required before Area Code and Number ✔ 2 = Area Code and Number Only

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Toll Call Prefix setting:

1.Press f00ss#40 2at extension 10 or 11.

2.Press Duntil the appropriate value displays.

3.Select another procedure or exit programming mode.

5-209