Night Service Button (#503)

Valid Entries

1 = Assigned to next available button at extension 10 2 = Not Assigned

3 = Select Button (then press a programmable button to assign Night Service to that button)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Night Service Button at extension 10:

1.Press f00ss#50 3at extension 10 or 11.

2.At this point:

If you want to assign Night Service to the first available button, press Duntil the following appears on the display:

Night Service

1Assigned-Ext10

If you want to remove the Night Service button assignment, press Duntil the following appears on the display:

Night Service

2 Not Assigned

If you want to assign Night Service to a specific button, press 3. The following appears on the display:

Night Service

3 Select Button

Then press a programmable button with lights to assign Night

Service to that button.

3.Select another procedure or exit programming mode.

4.Label the Night Service button at extension 10.

Using

To turn Night Service on:

1.Press the Night Service button at extension 10.

If a System Password is programmed, the green light next to the button flashes; you must continue with Step 2.

If no System Password is programmed, the green light is on steady and Night Service is on.

5-155

Page 254
Image 254
Lucent Technologies 518-458-100 manual Valid Entries, 155