Combination Extensions

Combination Extensions

A combination extension is an extension with two devices connected to it—either two standard devices, or a system phone and a standard device (but not two system phones). (For instructions on how to install a combination extension, see the PARTNER Endeavor Communications System Installation guide.)

The following are examples of useful combination extensions:

System phone plus standard telephone, for power failure backup on extension 10. A standard phone can only receive calls during a power failure at extension 10.

System phone plus answering machine

System phone plus fax machine

System phone plus an external alert (such as a bell or chime)

System phone plus headset, connect headsets and other adjunct equipment that do not require incoming ringing to any port or through the AUX jack on a PARTNER Endeavor telephone.

The telephones in a combination extension share a single extension in the same way several home telephones share a single line. A system telephone works as it always does and a standard telephone works as it always does when connected to the system.Only one phone or device can be used at a time, unless you want to join the two on a single call (the same way two people can pick up the same call on different telephones at home). For example:

Both phones share the same extension number.

Both phones share the same voice path; that is, when either phone is busy, the extension is busy.

Calls ring at both phones.

A second call can ring at the system phone while the standard phone is busy, but do not use the system phone to answer the second call until the standard phone is idle or the first call will be disconnected.

NOTE:

Standard phones can be used to make calls when plugged into any port of the PARTNER Endeavor 362 processor module or 362EC expansion module. However, standard phones will ring only when plugged into the Tip Ring ports, which are the bottom two ports.

If you make a voice-signaled intercom call to a combination extension with a system phone, only the system phone signals.

Call Waiting (#316) does not work on a standard phone in combination with a system phone.

3-13

Page 72
Image 72
Lucent Technologies 518-458-100 manual Combination Extensions