Lucent Technologies 518-458-100 manual Message Light Off F10XX, 147

Message Light Off (F10XX)

Message Light Off (F10XX)

Description

This feature turns off the message light at a specified extension (where XX is a system extension number).

Related Features

For instructions for turning on the message light, see Message Light On (F09XX).

Considerations

■This feature turns off the message light on system phones and standard phones that have message lights. (See Standard Telephones for a list of standard phones with message lights.)

■For message-waiting capability, standard phones with LED-compatible message-waiting lights must be connected to the PARTNER Endeavor 62 processor or 362EC expansion module.

■Do not use this feature for an extension that is covered by the voice messaging system. The voice messaging system automatically turns off the message light at a subscriber’s extension when messages in the mailbox have been deleted.

If a message light is inadvertently turned off at an extension that has a message in the mailbox, the message light is refreshed during the voice messaging system’s daily maintenance (3 a.m.).

■If you use the Message Light On feature to signal someone at a doorphone extension, you must use this feature to turn the light off.

■You can program a Message Light Off button on a system phone to turn the message light off at a specific extension with one touch.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Message Light Off button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button.

4.Press f10.

5-147