Problems with System Phones

Intercom Autodialer Does Not Work Properly

Possible Cause 1: Telephone cord is plugged into wrong jack on bottom of Intercom Autodialer.

What to do: Plug the modular telephone cord into the correct jack—see the PARTNER Endeavor Installation guide for instructions.

If the Intercom Autodialer works properly, the problem is solved.

If the problem remains, go to Possible Cause 2.

Possible Cause 2: Intercom Autodialer is not receiving auxiliary power.

What to do: Make sure the Intercom Autodialer is plugged into an electrical outlet.

If the Intercom Autodialer works properly, the problem is solved.

If the problem remains, go to Possible Cause 3.

Possible Cause 3: The cord is defective.

What to do: Unplug the cord from the base of the Intercom Autodialer and the wall jack. Replace the cord with a cord that you know works.

If the Intercom Autodialer works, the cord is faulty. Call the hotline to arrange for a replacement.

If the Intercom Autodialer does not work, call the hotline.

6-13

Page 344
Image 344
Lucent Technologies 518-458-100 manual Intercom Autodialer Does Not Work Properly