System Components

Configurations

The system can have one of three basic configurations:

Stand-alone PARTNER Endeavor 362 processor module. This configuration does not use a carrier.

2-Slot Carrier, which can hold up to two modules. The PARTNER Endeavor 362 processor module resides in the leftmost slot with either a 362EC expansion module or PARTNER Mail VS (PMVS) module in the right slot.

5-Slot Carrier, which can hold up to five modules. The PARTNER Endeavor 362 processor module resides in the center slot with four 362EC expansion modules in the remaining slots or three 362EC expansion modules and one PARTNER Mail VS module in the last slot.

NOTE:

A PARTNER Endeavor PC Upgrade Card is required.

In either carrier, one and only one of the modules must be a PARTNER Endeavor 362 processor module. The modules slide into the carrier, which channels power to the system.

System Modules

The following system modules can be installed in your system:

PARTNER Endeavor 362 Processor Module provides the software intelligence that controls the system’s features. It has jacks for three outside lines, eight extensions (the top six station ports support only Enhanced Tip Ring devices and the bottom two ports support both Enhanced Tip Ring and Tip Ring devices), a Music-On-Hold audio source and a grounding screw. It also has one PC Card slot, a bicolor red and green light-emitting diode (LED), and two AAA user-replaceable batteries. The module also provides support for Caller ID information on system display phones. The system requires one PARTNER Endeavor 362 processor module.

362EC Expansion Module provides expanded line and extension capability. It has jacks for three outside lines and eight extensions (again, Tip Ring devices are only supported on the bottom two ports). By using four 362EC expansion modules, you can have a maximum of 40 extensions with 15 lines (one PARTNER Endeavor 362 processor module and four 362EC expansion modules).

NOTE:

A 362EC expansion module will work ONLY in conjunction with a PARTNER Endeavor 362 processor module.

To get Caller ID, first you must subscribe to the service from your local phone company (if it is available) on a per-line basis, then connect those lines associated

1-5

Page 20
Image 20
Lucent Technologies 518-458-100 manual Configurations, System Modules