Lucent Technologies 518-458-100 manual Copy Settings #399

Copy Settings (#399)

Copy Settings (#399)

Description

This System Programming procedure copies all of the following settings from one extension to another:

#301 Line Assignment	#316 Call Waiting
#302 Line Access Restriction	#401 Outgoing Call Restriction
#303 Display Language	#405 Disallowed List Assignments
#304 Automatic Extension Privacy	#408 Allowed List Assignments
#305 Abbreviated Ringing	#501 Pickup Group Extensions
#308 Distinctive Ring	#502 Calling Group Extensions
#309 Intercom Dial Tone	#504 Night Service Group
#310 Automatic VMS Cover	#505 Hunt Group Extensions
#311 External Hotline	#601 Fax Machine Extensions
#312 Voice Interrupt On Busy	#607 AA Extensions
#313 Line Access Mode Line Ringing	Automatic Line Selection
#314 Pool Extension Assignment	Line Ringing
#315 Pool Access Restriction

Considerations

■This procedure is skipped in the sequence of programming procedures when cycling. To use this procedure, enter the code (#399) directly.

■For each type of phone, program one extension, then use this procedure to copy the programming from that extension to the others with the same number of line or pool buttons.

■Pooled extension settings can be copied to key extensions, except for extension 10. Key extension settings can be copied to pooled extensions.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To copy the programmed settings from one extension to another of the same type:

1.Press f00ss#39 9at extension 10 or 11.

2.At the Extension: prompt, enter the source extension to copy from. For example, to copy the current settings from extension 18, press 18.

5-65