Lucent Technologies 518-458-100 manual Using Telephone Programming, Telephone Models

Programming

Line/
Programmable
Buttons
Any unused		Ext.	Message
line button is
	Intercom	Intercom
programmable

Figure 2-4. Button Programming for Receptionist’s Phone

Alternatively, an Intercom Autodialer for the extensions the receptionist dials most frequently can be used. This leaves buttons on the phone free for more features and phone numbers.

Using Telephone Programming

There are two ways to program a telephone: Centralized Telephone Programming from extension 10 or 11(see below) and Extension Programming from a user’s own extension (see ‘‘Using Extension Programming’’ on page 2-29).

Telephone Models

Figure 2-5illustrates a PARTNER Endeavor-18D set up as a key extension and Figure 2-6illustrates a PARTNER Endeavor-6 phone set up as a pooled extension. As you program buttons, mark their functions on the phone’s labeling sheet (see the examples in Figure 2-5and Figure 2-6).

NOTE:

A PARTNER Endeavor-6 phone only has four buttons available for lines or pools. If four lines are assigned, it has no programmable buttons. If the main pool is assigned, it has two programmable buttons. The MDW 9000 phones look just like a PARTNER Endeavor-6 phone when you program them centrally.

2-26