Lucent Technologies 518-458-100 manual Call Pickup, Programming

Call Pickup (I6XX)

Call Pickup (I6XX)

Description

This feature lets users answer any intercom, outside, or transferred call ringing at another specified extension (where XX is a system extension number). This feature is useful for officemates who agree to answer each other’s calls.

Related Features

Use this feature to retrieve a parked call—see Call Park. Note that if you use Call Pickup to answer a call that is parked at an extension that also has ringing calls, you will be connected to the parked call—parked calls take precedence over ringing calls.

Considerations

You can program a Call Pickup button on a system phone to pick up with one touch a call that is ringing or parked at another specified extension.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Call Pickup button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button.

4.To specify the extension to be answered, press left i, followed by6 and the two-digit system extension number. For example, to answer a call ringing at extension 23, press left i623.

5.Program another button for this extension or exit programming mode.

Using

System Phone

1.If you want, lift the handset.

2.Press the programmed button, or press i6and the two-digit number of the extension at which the call is ringing or parked.

Standard Phone

1.Lift the handset.

You hear intercom dial tone.

2.Dial 6plus the two-digit number of the extension at which the call is ringing or parked.

5-51