Lucent Technologies 518-458-100 manual VMS Hunt Schedule #507, Description Voice mail, 223

VMS Hunt Schedule (#507)

VMS Hunt Schedule (#507)

Description Voice mail

This feature applies only if you have a voice messaging system.

This System Programming procedure determines whether the outside lines assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only during Day operation (Night Service is off), or only during Night operation (Night Service is on). This feature affects only the Automated Attendant Service of the voice messaging system.

Related Features

■You must use Group Call Distribution (#206) to assign lines to Hunt Group 7.

■You must use Hunt Group Extensions (#505) to assign the extensions associated with the voice messaging system hardware to Hunt Group 7.

■If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service Button (#503) to program a Night Service button for extension 10.

Valid Entries

1 = Always ✔

2 = Day Only

3 = Night Only

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the VMS Hunt Schedule setting for the voice messaging system’s Automated Attendant Service:

1.Press f00ss#50 7at extension 10 or 11.

2.Press Duntil the appropriate value displays.

3.Select another procedure or exit programming mode.

5-223