Lucent Technologies 518-458-100 manual Press f00ss#1

Feature Reference

Considerations

■The Automatic System Answer/Direct Extension Dial PC card is purchased separately and must be installed (see PARTNER PC Card Installation Instructions).

■Use the Automatic System Answer Record/Playback feature to record a message before using Automatic System Answer since there is no default message.

■An Automatic System Answer button must be programmed on a button with lights on the system display phone at extensions 10. (This feature will not work if it is programmed on a button without lights.)

■Automatic System Answer can handle up to three outside calls simultaneously.

Valid Entries

1 = Assigned

2 = Not Assigned ✔

3 = Select button (then press a programmable button to assign Automatic System Answer to that button)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To assign or unassign an Automatic System Answer button with lights at extension 10:

1.Press f00ss#1 11.

2.If you want to assign Automatic System Answer to the first available button,

press Duntil the following appears on the display:

ASA Button

1 Assigned-Ext10

If you want to unassign Automatic System Answer, press Duntil the following appears on the display:

ASA Button

2 Not Assigned

If you want to assign Automatic System Answer to a specific button, press

3. The following appears on the display:

ASA Button

3 Select Button

Then press a programmable button with lights to assign Automatic System Answer to that button.

5-22