Lucent Technologies 518-458-100 manual Allowed List Assignments #408

Feature Reference

Allowed List Assignments (#408)

Description

This System Programming procedure lets you assign up to eight Allowed Phone Number Lists to a specific extension.

Related Features

You must use Allowed Phone Number Lists (#407) to create the lists of allowed telephone numbers before you use this procedure.

Valid Entries

1 = Assigned to extension

2 = Not Assigned to extension ✔

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To assign Allowed Phone Number Lists to an extension:

1.Press f00ss#40 8at extension 10 or 11.

2.Enter the number of the extension to be programmed. For example, to program extension 27, press 27. The following appears on the display:

AllowTo 27

List No:

3.Enter the list number (1–8). For example, to select list 1, press 1.

4.To assign or unassign the list, press Duntil the appropriate value displays.

5.At this point:

■To assign or unassign another list to this extension, press nor until the list number shows on the display. Then repeat Step 4.

■To program another extension, press Nor P and begin at Step 2.

6.Select another procedure or exit programming mode.

5-6