Lucent Technologies 518-458-100 manual Using Centralized Telephone Programming

Using Telephone Programming

Any unused		Ext.	Message
	Intercom	Intercom
line button is
programmable

Figure 2-5. Example of PARTNER Endeavor-18D Phone as a Key Extension

Intercom Intercom

Ext.

Message

Figure 2-6. Example of PARTNER Endeavor-6 Phone as a Pooled Extension

Using Centralized Telephone Programming

Use Centralized Telephone Programming to program features or store telephone numbers for individual extensions from extension 10 or 11. Most features also can be programmed on a system phone at the user’s extension. Keep in mind the following exceptions:

■Automatic Line Selection and Line Ringing always must be programmed using Centralized Telephone Programming.

■If a user has a standard phone, Personal Speed Dial Numbers for the extension can be programmed only by using Centralized Telephone Programming.

■If a user has a standard phone or a non-display system phone, Extension Name Display for the extension can be programmed only by using Centralized Telephone Programming.

During Centralized Telephone Programming, the display phone at extension 10 or 11 takes on the characteristics of the telephone being programmed, including any System Programming settings and lines assigned to the phone. If you have any

2-27