Lucent Technologies 518-458-100 manual Programming

Feature Reference

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Automatic VMS Cover setting for an extension:

1.Press f00ss#31 0at extension 10 or 11.

2.Enter the number of the extension to be covered by the voice messaging system.

3.To assign or unassign Automatic VMS Cover, press Duntil the appropriate value displays.

4.To program another extension, press nor puntil the extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-34