Lucent Technologies 518-458-100 manual Display Language #303, Valid Entries

Display Language (#303)

Display Language (#303)

Description

This System Programming procedure identifies the language in which display messages appear if the extension has a system display phone. The language is set for each extension, so phones in the same system can display different languages.

Valid Entries

1 = English ✔

2 = Spanish

3 = French

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Display Language setting for an extension:

1.Press f00ss#30 3at extension 10 or 11.

2.Enter the number of the extension to be programmed. The current display language displays.

3.To change the display language, press Duntil the appropriate value displays.

4.To change the display language for another extension, press nor until the extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-87