Lucent Technologies 518-458-100 manual System Time #103, 208

Feature Reference

System Time (#103)

Description

This System Programming procedure sets the time that appears on system display phones.

Related Features

■	Backup Programming—Automatic (#123)	uses the System Time to
	schedule the automatic backups.
■	Backup Programming—Automatic (#123)	and Backup Programming—

Manual (#124) do not backup the System Time.

■Restore Programming (#125) does not restore the System Time.

Considerations

■Be sure that the System Time is set correctly before using backup or restore procedures.

■Enter the time in 24-hour notation. In this scheme, the hours of the day are 0000 (12 midnight) to 2359 (11:59 p.m.). Since each time must have four digits, use leading zeros when necessary. For example, to set the time to 9:00 a.m., enter 0 900. For 4:45 p.m., enter 1645.

■The time appears on system display phones as a.m. or p.m. (not in 24-hour notation).

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the System Time:

1.Press f00ss#103at extension 10 or 11.

2.Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m., press 141 5.The following appears on the display:

System Time

Data 1415

This time appears on system display phones as 2:15 p.

3. Select another procedure or exit programming mode.

5-208