Lucent Technologies 518-458-100 manual Programming, 137

Line Coverage Extension (#208)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Line Coverage setting for an extension:

1.Press f00ss#208at extension 10 or 11.

2.Enter the desired line number. For example, to program line 12, press 1

2.

3.Enter the number of the extension to be assigned ownership of the line.

4.At this point:

■To delete the current setting, press r.

■To program another line, press nor puntil the line number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-137