Lucent Technologies 518-458-100 Music-On-Hold Volume #614, 153, Display shows the current setting

Music-On-Hold Volume (#614)

Music-On-Hold Volume (#614)

Description

This System Programming procedure allows you to select one of seven volume settings for the external music source provided through the Music-On-Hold jack on the PARTNER Endeavor 362 processor module. This setting is system-wide.

Related Features

Music-On-Hold (#602) activates or deactivates the Music-On-Hold jack on the processor module.

Considerations

Changes to the Music-On-Hold Volume setting will have immediate effect on all calls currently receiving Music-On-Hold treatment.

Valid Entries

1	+
2		+
3			+
4				+ ✔
5				+

6 +

7 +

Note: 1 = lowest volume, 10 = highest volume

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Music-On-Hold Volume setting:

1.Press f00ss#61 4at extension 10 or 11.

The display shows the current setting.

2.To change the setting, press the number of the setting on the dialpad, or press Dor duntil the correct setting is displayed.

3.If you want to return the volume to the default setting, press r.

5-153