Feature Reference

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To identify a hotline extension and its alert extension:

1.Press f00ss#60 3at extension 10 or 11.

2.At the Extension: prompt, enter the hotline extension number. For example, to program extension 33 as the hotline, press 33.

3.At the Data - - - - - - - - - - - - prompt, enter the alert extension number— see “Valid Entries” on the previous page. For example, to program extension 32 as the alert extension, press 32. The following appears on the display:

HotLine Ext 33

Data 32

4.At this point:

To change the hotline and alert extension numbers you just entered, repeat Steps 2 and 3.

To delete the existing hotline and alert extension numbers, press

r.

To identify another hotline and alert extension pair, press nor puntil the new hotline extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

Using

To use the hotline phone:

1.Lift the handset of the hotline phone. The designated alert extension rings.

2.When the call is answered, speak into the handset.

5-120

Page 219
Image 219
Lucent Technologies 518-458-100 manual Using, 120