Lucent Technologies 518-458-100 manual Other Specifications, Specification Description

Specifications

Other Specifications

Specification	Description
Switch Fabric	● Full digital, nonblocking
Electrical	● 35 watts (120 BTUs/hr) per PARTNER Endeavor 362 processor module during normal power consumption
Specifications	● 45 watts (154 BTUs/hr) per PARTNER Endeavor 362 processor module during maximum power consumption
	● 30 watts (105 BTUs/hr) per 362EC expansion module during normal power consumption
	● 40 watts (140 BTUs/hr) per 362EC expansion module during maximum power consumption
	● 45 days to 6 months memory backup with 2 AAA-size standard alkaline batteries (IEC LR03)
Processor Module	● 68306 16 Mhz processor
Specifications	● 256Kbyte RAM
	● 512Kbyte FLASH ROM
	● Custom VLSI DSP ASIC—16bit, 52 Mhz
	—VLSI = Very Large Scale Integration
	—DSP = Digital Signal Processor
	—ASIC = Application Specific Integrated Circuit
Extension Jack	● Ringing voltage: +55VRMS Balanced ringing within a trapezoidal wave shaping
Specifications	● 38- to 42-volt talk battery
(Endeavor	● Ringing frequency: 20 HZ
Processor and
362EC module)
Music-On-Hold	● Accepts 2 volts at 50 Kohms maximum input
Jack Specifications	● 0 – 18 dB attenuation
Environmental	● Mount on a wall at least 2 feet (0.6 meters) from the floor (wall mounting required)
Requirements-	● Locate within 5 feet (1.5 meters) of the network interface jacks and a properly grounded electrical outlet not
Control Unit	controlled by a switch, using supplied 7-foot (2.1-meter) cords
	● Operating temperature 32° to + 104°F (0° to + 40°C), not in direct sunlight
	● Humidity 15% – 90%, noncondensing
	● For proper ventilation and easy replacement of modules, provide the following minimum clearance around the
	control unit:
	—5-Slot Carrier: 1 foot (0.3 meter) clearance at the top and sides and 2 feet (0.6 meter) at the front and bottom
	—2-Slot Carrier or Stand-alone Endeavor processor module: 1 foot (0.3 meter) clearance at the front, top and
	right side, and 2 feet (0.6 meter) at the bottom and left side
	● Locate in an area free of excess moisture, corrosive gases, dust, and chemicals
Electrical	● U.S. and Canada: 90-130 VAC, 50-60 Hz, 3-prong outlet separate ground, separately fused at 15 Amps
Requirements-	● Grounding to comply with Underwriters Laboratories (UL) 1459:
Control Unit	A. An insulated grounding conductor that is not smaller in size and equivalent in insulation material and
	thickness to the grounded and ungrounded branch circuit supply conductors, except that it is green with or
	without one or more yellow stripes, is to be installed as part of the circuit that supplies the product or
	system
	B. The grounding conductor mentioned in item A is to be connected to ground at the service equipment
	C. The attachment-plug receptacles in the vicinity of the product or system are all to be of a grounding type,
	and the grounding conductors serving these receptacles are to be connected to earth ground at the service
	equipment
	(continued)

A-2