Lucent Technologies 518-458-100 manual Programming

Automatic Extension Privacy (#304)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Automatic Extension Privacy setting for an extension:

1.Press f00ss#30 4at extension 10 or 11.

2.Enter the number of the extension to be programmed. For example, to program extension 16, press 1 6.

3.To assign or unassign Automatic Extension Privacy, press Duntil the appropriate value displays.

4.To program another extension, press nor puntil the extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-17