Lucent Technologies 518-458-100 manual 131, Current restriction displays

Line Access Restriction (#302)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To restrict an extension from making calls on a specific line:

1.Press f00ss#30 2at extension 10 or 11.

2.At the Extension: prompt, enter the extension number to be programmed. For example, to program extension 23, press 23.

3.At the Line: prompt, enter the line number to be restricted at this extension. For example, to restrict line 2, press 02.

The current restriction displays.

4.To change the line restriction for this extension, press Duntil the appropriate value displays—see “Valid Entries” on the previous page.

5.At this point:

■To restrict another line at this extension, press nor p until the line number shows on the display. Repeat Step 4.

■To restrict another extension, press NPand begin at Step 2.

6.Select another procedure or exit programming mode.

5-131