Lucent Technologies 518-458-100 manual DXD Button Assigned-Ext10

Direct Extension Dial Button (#113)

Considerations

■The Automatic System/Direct Extension Dial PC card is purchased separately and must be installed (see the PARTNER PC Card Installation Instructions.

■Use the Direct Extension Dial Record/Playback to record a message before using Direct Extension Dial since there is no default message.

■It is recommended that you use only one automated answering option for incoming calls (either this feature, the Automated Attendant Service of the voice messaging system, or a PARTNER Attendant).

■Direct Extension Dial does not transfer calls to Calling Groups.

■This feature can handle three outside calls simultaneously.

■If you have lines programmed for Direct Extension Dial and Automatic System Answer, Direct Extension Dial answers the call first.

■A Direct Extension Dial button must be programmed on a button with lights on the system display phone at extension 10. (This feature will not work if it is programmed on a button without lights.)

Valid Entries

1 = Assigned

2 = Not Assigned ✔

3 = Select button (then press a programmable button to assign Direct Extension Dial to that button)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To assign or unassign a Direct Extension Dial button with lights at extension 10:

1.Press f00ss#11 3.

2.If you want to assign Direct Extension Dial to the first available button,

press Duntil the following appears on the display:

DXD Button

1 Assigned-Ext10

If you want to unassign Direct Extension Dial, press Duntil the following appears on the display:

DXD Button

2 Not Assigned

5-69