Lucent Technologies 518-458-100 manual Direct Extension Dial Record/Playback, Using

Feature Reference

Direct Extension Dial Record/Playback (I892)

Description

This feature lets you record and play back the message that callers hear when a call is answered by the Direct Extension Dial feature. The maximum length of the message is 40 seconds.

Related Features

■Direct Extension Dial affects incoming calls only on lines identified using Direct Extension Dial Lines (#205).

■You must program a button with lights on the system display phone at extension 10 to turn Direct Extension Dial on and off. Use Direct Extension Dial Button (#113) to program the button.

■Calls that ring on lines programmed with Direct Extension Dial are picked up after two rings, as a default. To change the number of rings, use Direct Extension Dial Delay (#112).

Considerations

■The Automatic System/Direct Extension Dial PC card is purchased separately and must be installed. If the PC Card has not been installed, see the PARTNER PC Card Installation Instructions.

■You should record a message before using Direct Extension Dial since there is no default message.

■You can record only one message for this feature.

■If you do not record a message for Direct Extension Dial, callers will not know to enter an extension or Hunt Group number when the call is answered.

■You must record the Direct Extension Dial message from the system display phone at extension 10 or 11.

■You cannot record or play a message while Direct Extension Dial or Automatic System Answer is answering a call. When you want to record or play a message, turn off Direct Extension Dial and Automatic System Answer and wait for any calls in the process of being answered by the system to be completed.

Using

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

5-74