Lucent Technologies 518-458-100 manual Using System Phone

Call Forwarding/Call Follow-Me (F11,XX,XX)

■You can program Call Forwarding on a button on a system phone. Use a button with lights if you want a visual indication when your calls are forwarded. When the green light is on, your calls are forwarded; when the green light is off, calls ring at your extension.

■If the Call Forwarding feature code and optional originating and destination extensions are programmed on a button with lights, you can use the button to turn Call Forwarding on and off with one touch. (The lights show when Call Forwarding is on, even if calls are forwarded to a different extension than the one stored on the button, and you can still use the button to turn Call Forwarding off.)

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Call Forwarding button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button, preferably a button with lights.

4.At this point, you can do one of the following:

■Press f11.

■Press f11and the number of the originating extension.

■Press f11, the number of the originating extension, and the number of the destination extension.

5.Program another button for this extension or exit programming mode.

Using

System Phone

To forward calls manually:

1.Press f11.

2.Dial your extension number.

3.Dial the extension number at which you want the calls to ring. To remove Call Forwarding manually:

1.Press f11.

2.Dial your extension number twice.

5-47