Lucent Technologies 518-458-100 manual Character Codes Letters Numbers

Extension Name Display

Table 5-1. Character Codes

Letters:		Numbers:
A = 21	N = 62	blank = 11
B = 22	O = 63	0 = 00
C = 23	P = 71	1 = 10
D = 31	Q = 72	2 = 20
E = 32	R = 73	3 = 30
F = 33	S = 74	4 = 40
G = 41	T = 81	5 = 50
H = 42	U = 82	6 = 60
I = 43	V = 83	7 = 70
J = 51	W = 91	8 = 80
K = 52	X = 92	9 = 90
L = 53	Y = 93
M = 61	Z = 94

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To assign a name to an extension:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed. For example, to program extension 12, press 1 2.

3.Press left i. For extension 12, the display reads:

12 Enter Name

If a name was assigned previously to this extension, that name displays instead.

4.Enter the two-digit code for each character you want to enter. (See Table 5-1for codes.) For example, to enter the name Andy, press 2162

3193. The display reads:

12ANDY

5.If you make a mistake, you can press!to clear the display. Repeat Step 4 to enter the correct name.

6.Program a button for this extension or exit programming mode.

5-99