HP CP4525DN Laser CC494A#ABA Remove Shipping Sheet, Replace Color Cartridge, Replace Fuser KIT

Table 3-14Control-panel messages (continued)

Description	Recommended action
REMOVE SHIPPING SHEET	The transfer unit shipping sheet was not	1.	Open the right door.
	removed before you turned the product on.	2.	Remove the shipping sheet.
		3.	Close the right door.
REPLACE <COLOR> CARTRIDGE	The product indicates when a supply level is	Replace the specified color cartridge. See
	at its estimated end of life. The actual life	Print cartridges on page 74.
	remaining might be different than the	Or, configure the product to continue printing
	estimation. Have a replacement supply
	available to install when print quality is no	by using the MANAGE SUPPLIES menu. For
	longer acceptable. The supply does not need	more information about the MANAGE
	to be replaced now unless the print quality is	SUPPLIES menu, see Manage supplies
	no longer acceptable. After an HP supply has	menu on page 318.
	reached its approximated end of life, HP’s
	premium Protection Warranty on that supply
	ends.

REPLACE FUSER KIT	The product indicates when the fuser kit is at
	its estimated end of life. The actual life
	remaining might be different than the
	estimation. Have a replacement fuser kit
	available to install when print quality is no
	longer acceptable. The fuser kit does not
	need to be replaced now unless the print
	quality is no longer acceptable. After the fuser
	kit reaches its approximated end of life, HP’s
	premium Protection Warranty on that fuser kit
	ends.

CAUTION: The fuser can be hot while the product is in use. Wait for the fuser to cool before handling it.

1.Open the right door.

2.Grasp the blue handles on both sides of the fuser and pull straight out to remove it.

3.Install the new fuser.

4.Close the right door.

REPLACE SUPPLIES	Two or more supplies are at the estimated
	end of life. The actual life remaining might be
	different than the estimation. Have a
	replacement supply available to install when
	print quality is no longer acceptable. The
	supply does not need to be replaced now
	unless the print quality is no longer
	acceptable. After an HP supply has reached
	its approximated end of life, HP’s premium
	Protection Warranty on that supply ends.

Press the OK button to see which supplies need to be replaced.

Or, configure the product to continue printing by using the MANAGE SUPPLIES menu. For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 318.

REPLACE SUPPLIES - Using black only	You can configure the product to print using
	only black when the level of a color supply
	has reached its estimated end of life.
	However, the color supply might still be able
	to produce acceptable print quality.
	The supply life remaining is used to
	determine if a supply is very low. The supply
	life remaining is an approximation only and
	varies depending on the types of documents
	printed and other factors.

No user input is required for printing to continue in black. To continue printing in color, either replace the supply or reconfigure the product by using the MANAGE SUPPLIES menu on the control panel.

For more information about ordering supplies, see Parts and diagrams on page 425.

For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 318.

ENWW Tools for troubleshooting 367