HP CP4525DN Laser CC494A#ABA manual ROM Disk File Operation Failed, ROM Disk File System is Full

Table 3-14Control-panel messages (continued)

Description	Recommended action
ROM DISK FILE OPERATION FAILED	A PJL file system command attempted to		Press the OK button to clear.
To clear press OK	perform an illogical operation.
ROM DISK FILE SYSTEM IS FULL	A PJL file system command could not store		Press the OK button to clear.
To clear press OK	something on the file system because the file
	system was full.
ROM DISK IS WRITE PROTECTED	The file system device is protected and no		Press the OK button to clear.
To clear press OK	new files can be written to it.
Rotating <color> Motor	A component test is in progress; the		Press the stop button		when ready to stop
To exit press	component selected is the <color> cartridge		this test.
	motor.
Rotating Motor	The product is executing a component test		Press the stop button		when ready to stop
To exit press	and the component selected is a motor.		this test.
SANITIZING DISK <X>% COMPLETE	The hard disk is being cleaned.		Contact the network administrator.
Do not power off
SIZE MISMATCH IN TRAY XX	The paper in the listed tray does not match		1. Load the correct paper.
	the size specified for that tray.		2.	Verify the paper is positioned correctly.
			3.	Close the tray and verify that the control
				panel lists the correct paper size and
				type. Reconfigure the size and type if
				necessary.
Sleep mode on	The product is in sleep mode. A button press,		No action is necessary.
	receipt of printable data, or an error condition
	will clear this message.
STANDARD TOP BIN FULL	The output bin is full.		Empty the bin and continue printing.
Remove all paper from bin
SUPPLIES IN WRONG POSITION	Two or more print-cartridge slots contain the		Install the correct color cartridge in each slot.
	wrong color print cartridge.
	From left to right, the print cartridges should
	be installed in this order:
	●	Yellow
	●	Magenta
	●	Cyan
	●	Black

ENWW Tools for troubleshooting 369