HP CP4525DN Laser CC494A#ABA manual 179Remove the laser/scanner assembly Y/M 5

4.Rotate the front of the laser/scanner assembly down (callout 1), and then slide it toward the right (callout 2). Lower the left corner, and then rotate the left corner out of the product (callout 3).

Reinstallation tip When the scanner is reinstalled, make sure that the tab on the front of the laser/scanner is inserted in the alignment hole in the product chassis. See callout 1 in Figure 2-179 Remove the laser/scanner assembly (Y/M) (5 of 5) on page 189

Figure 2-178Remove the laser/scanner assembly (Y/M) (4 of 5).

1

32

5.Pull the laser/scanner assembly out of the product to remove it.

Reinstallation tip When the scanner is removed, locate the alignment tab (callout 1) on the front of the laser/scanner. The tab must be inserted in the alignment hole in the product chassis when the assembly is reinstalled.

Figure 2-179Remove the laser/scanner assembly (Y/M) (5 of 5)

1

ENWW Internal assemblies 189