HP CP4525DN Laser CC494A#ABA manual 187Reinstall the PGC actuators 3 Removal and replacement

2.Remove the actuator and spring from the product. Install the spring on the actuator. Figure 2-186Reinstall the PGC actuators (2 of 5)

3.Before proceeding, take note of the following:

●Callout 1: The pin on the actuator will be installed into the slot in the chassis.

●Callout 2: The pin on the pivot arm will be installed into the slot on the actuator.

●Callout 3: The end of the spring will be installed onto the tab on the chassis.

Figure 2-187Reinstall the PGC actuators (3 of 5)

2

1

3

194 Chapter 2 Removal and replacement ENWW