HP CP4525DN Laser CC494A#ABA manual 146Remove the high-voltage power supply lower 7

6.Disconnect one FFC (callout 1). Release only the wire harnesses from the guide (callout 2) and then remove the power supply.

NOTE: Remove the FFC (callout 1) and guide (callout 2) with the PCA. Replacement high-voltage power supply PCAs have the FFC and guide installed.

Figure 2-146Remove the high-voltage power supply lower (7 of 7)

1

2

Reinstall the high-voltage power supply lower

When you reinstall the power supply, look through the holes in the PCA and make sure that the high- voltage contact springs are correctly seated against the PCA.

Figure 2-147Reinstall the high-voltage power supply lower

ENWW Internal assemblies 167